NOTE:BECAUSE OF HIGH RATE OF SPAM, THE EMAIL SERVER INFO@WORLD-EDUCATIONAL-SERVICES.COM HAS BEEN DISABLED PLEASE, USE INFORMATION@ADVANCEDMICROCIRCUITS.COM OR SALES@ADVANCEDMICROCIRCUITS.COM AS OF THAT DATE.

For any technical questions, please email us at support@advancedmicrocircuits.com

THE NEW 20M CHIP IS HERE! WE ALSO CARRY 20-PIN SOCKETS

CHECK OUT OUR TWO NEW USB PC-BASED SCOPES, 40MHz and 200MHz

NEW PRODUCT: If you are interested in Digital Signal Processing design, please, visit our SOFTWARE page and read all about our SPADeS DSP Design Package, the best in the industry.

NEW PRODUCT:THE ULTIMATE PROPELLER BOARD ("Propeller" is Trademark of PARALLAX).

The board is equipped with the PARALLAX Propeller chip. If you do not know what is parallelism, you will experience it with our board. Here is what you get:

(1)VGA Port

(2)PC/PS2 Port

(3)Mouse Port

(4)Microphone Port

(5)RS232 Port

(6)Headphone Port

(7)Software and more...

Graphics with our multifunction Propeller board

Visit the PROPELLER MULTIFUNCTION CATEGORY.

NEW PRODUCT: OUR NEW ARDUINO NANO

Arduino Nano overview:

Arduino Nano is a surface mount breadboard embedded version with integrated USB. It is a smallest, complete, and breadboard friendly. It has everything that Diecimila has (electrically) with more analog input pins and onboard +5V AREF jumper. Physically, it is missing power jack and power select jumper. Since the Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.

Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). It’s a four-layer board with power and ground planes to help provide ICs with sufficient charge during switching and reduce noise (EMC) on high speed switching I/O pins. Ground plane help reduce radiation (EMI). Power plane is low in inductance; therefore any transients that may develop on the power line will be at lower levels.

You end up paying less with Nano than Mini and USB combined!

Specifications:

Microcontroller                        Atmel ATmega168
Operating Voltage (logic level) 5 V
Input Voltage (recommended) 7-12 V
Input Voltage (limits)               6-20 V
Digital I/O Pins                        14 (of which 6 provide PWM output)
Analog Input Pins                    8
DC Current per I/O Pin            40 mA
Flash Memory                          16 KB (of which 2KB used by bootloader)
SRAM                                     1 KB
EEPROM                                 512 bytes
Clock Speed                           16 MHz
Dimensions                            0.73” x 1.70”

Features:

• Automatic reset during program download
• Power OK blue LED on the bottom
• Green (TX), red (RX) and orange (L) LED
• +5V to AREF jumper
• Auto sensing/switching power input
• Small mini-B USB for programming and serial monitor
• ICSP header for direct program download
• Power OK blue LED on the bottom
• Standard 0.1” spacing DIP (breadboard friendly)
• Manual reset switch

Power:

The Arduino Nano can be powered via the mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

NEW PRODUCT:Nano USB-to-Serial converter

Now you can breadboard your own PICAXE project board and power it via USB.

USB-SER-NANO-5 is a nano small USB to Serial UART (5.0V logic level) converter module. It allows you to connect your computer through USB port and use them as the regular serial communication. All USB protocol is handled within the module. There is no other device or programming required.

This board features innovations that set them apart from other USB to Serial Converter boards. Innovations feature like 256 byte receive buffer and 128 byte transmit buffer utilize new buffer smoothing technology to allow for high data throughput. The voltage levels at TX and RX pins of the USB-SER-NANO-5 are 0 and 5.0V. That mean the TX and RX pins from the USB-SER-NANO-5 can be connected directly to RX and TX pins of your preferred microcontroller or any serial UART application.

The USB-SER-NANO-5 board is perfect for embedded systems that require a serial connection to a computer. The boards attach directly to the USB bus via a standard type mini B receptacle connector. It shows up on any Windows computer as a standard serial COM port. Any applications that talk to this COM port is automatically convert to USB and back to UART to your target board.

Drivers are available for Windows 98, 98SE, ME, 2000, Server 2003, XP, Vista, XP Embedded and CE.NET 4.2 & 5.0. Mac OS8/9, OS-X and Linux 2.4 and greater are supported.

“MUST HAVE item for Electronic Engineers, Student and hobbyists!”

Features:

• Super small 1.05 x 0.50 inches board.
• Single board USB to asynchronous serial data transfer UART interface.
• Decoupling supply voltage.
• Design easy for breadboard.
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/ even/ mark/ space/ no parity.
• Data transfer rates from 300 baud to 1 Mega baud.
• 256 byte receive buffer and 128 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
• Transmit and receive LEDs.
• Support for USB suspend and resume.
• Low USB bandwidth consumption.

You will find it in the USB-to-Serial Converter category.

NEW PRODUCT: We proudly announce our association with Microengineering Labs, Inc. , the designer and proprietor of PICBASIC and other fine products. Please, visit our SOFTWARE page and purchase one of the finest software tools for PICMicros. We will eventually upload their other fine products.

SALE: If you purchase 5 08M chips and 3 18X chips, we will give you one 28A free. Sale will last as long as the 28A's last. First come, first served.

PICAXE PRICE COMPARISON

Part

AdvancedMicro Competition

Chips

3.10 08M 3.95

3.85 14M 3.95

8.25 18X 9.95

3.75 20M Not available

10.00 28X1/with resonator 11.95/wo

10.50 40X1/w resonator 11.95/wo

Cables

5.95 Download Serial * 6.95

19.50 USB-to-Serial Not available

Boards/Project

3.95 08M protoboard ** 4.95

6.50 14M protoboard Not available

9.50 18X protoboard 10.95

6.50 20M protoboard Not available

4.50 Breadboard adaptor 4.95

24.00 28X1 protoboard Not available

28.00 28/40 project board 35.95

Starter Packs

* Our starter packs include the download serial cable, competition charges extra.

17.00 School Experimental Pack Not available

12.95 08M Starter Pack 13.95

15.95 14M Starter Pack 15.95

23.95 18X Starter Pack 24.95

32.00 28X1 Starter Pack 37.95

49.00 AXE090 18X Exper.Pack 51.00

12.00 08M Servo Board Not available

14.00 08M Motor Driver 15.95

14.00 20M Starter Pack Not available

** Anticipated future price reduction.

OUR SCHOOL EXPERIMENTER PACK (YOU GET ALL THE PARTS!) IS STILL AT $17.00.

Our store/office

Our stock room

Our training room

We sell to individuals, schools, and industry. In addition to Paypal, we take credit card orders over the phone, company or personal checks mailed in, money orders, Western Union, and bank wire transfers (customer pays the banking charges). Last but not least, we accept Purchase Orders from accredited schools and from corporations registered with D&B.

Please, support the following dealers:

www.oldfashionroboticstore.com, www.qrpme.com, www.r4systems.com

Remember, our 28X1 and 40X1 chips come with a FREE 16MHz resonator. Some customers order the chips AND resonators. You do not need to order the resonator, unless you need it for something else. However,if you do order, and pay for, a resonator, it will be shipped to you since our order acceptance and shipping system is fully automated. Also, the 08M starter pack comes with an 08M chip. You do not need to order an extra 08M chip, unless you need it for something else.

NOTE: The starter packs come with the corresponding PICAXE--i.e the 18X Starter Pack comes with an 18X, the 28X Starter Pack comes with a 28X1, etc. You do not need to purchase an extra chip, unless you want it for another project.

OUR NEW LINE OF I2C MINIATURE BOARDS. TO PURCHASE,VISIT THE "I2C BOARDS PAGE"

The minips is a power supply kit for the solderless breadboard. It takes power from the 2.1mm DC wall adapter or any DC voltage supply. This board features innovations that set it apart from other voltage regulator boards. Innovations feature like dual input voltage sources (2.1mm power jack is primary source, both sources can be hook up at the same time), heat sink on the voltage regulator (better heat transfer), power ON LED indicator and ON/OFF switch.

i2c 12-bit 8-channel Analog-to-Digital Converter

i2c 8-bit Digital-to-Analog Converter

i2c 16 - channel i/o expander

Visit the I2C Miniature Boards page to review other boards such as Real-time Clock, 4-digit display, Dual Axis accelerometer, 1kHz to 68MHz programmable Oscillator, Temperature Module.

We have the AXE090 3-chip experimental board in stock (Kit comes with an 18X). Low price of $49. Includes download cable.

Compare price of competition.

The price of ALL our starter packs INCLUDES download cable. That is how Revolution Education sells the starter packs, that is how we sell ours. No added costs.

The best buy of the year. Our 4-chip board.

We now have stock of our popular 4-chip board kit. It comes with all 4 PICAXE chips (14M, 18X, 28X1,40X1), ULN2803 Darlington amplifier, LN293 motor driver , a 24LC16 EEPROM, and an extrernal solderless breadboard. All chips are socketed. The kit includes all the parts for assembly and a download serial cable. A steal at $45! The 4-chip board comes also with an external solderless breadboard (not shown).

Coming up: An i/o expansion board . The board will accomodate a DS1307 real-time clock, a Light Dependent Resistor, a DS18B20 Temperature Chip, a potentiometer for A/D experiments, and a solderless breadboard.

Now we sell the XBEE module to go with the AXE210 Connect board and the Coridium XBEE Board. Visit the PICAXE starter packs.

TAKE A LOOK AT OUR NEW WIRING KITS. GO TO COMPONENTS

Our FREEDUINO, an ARDUINO Clone.

All parts for assembly and a detailed assembly manual are included.

another fine product

We are distributors of the CORIDIUM line of ARM microcontrollers and boards. The CORIDIUM is an ARM processor on a module. Here are its specs:

60 MHz ARM7 CPU, Popular DIP24 form factor, BASIC compiler, or pre-configured ANSI C compiler , 16 IOs plus serial interface, 6 10bit A/Ds, 6 Hardware PWM channels.

Need a Simple Solution to a Control Problem?
You've come to the right place. Coridium brings the power of a 32 bit ARM processor to an easy to use module and now a single board computer. Add to that a compiled BASIC that delivers performance 200 times what has been available before. With our library of hardware routines you can control a wide range of peripherals quickly. And now a pre-configured C compiler with extensive hardware support is available too.

You can monitor data and modify operating parameters through the USB, Bluetooth, or Zigbee interface and now Ethernet . Ideal for factory automation, home automation, data acquisition, and educational applications. Ready to use right out of the box so you can start solving your control problem today - no need to learn a new programming language or complicated development system.

You can purchase this fine product also on a development board: